Barge Wide Beam Custom Built Project
€31,450.00 (Approx £26,262)Barge Wide Beam Custom Built Project
Ideal residential barge
Final Bid
€31,450.00 (Approx £26,262)
- Boat REF# · 240003
- LOA · 17.80m
- Year · 1993
- Construction · Steel
- Underwater profile · Full-displacement
- Berths · 4
- Engine · 1 x Diesel 140hp, FORD BETA Marine 6 cyl. 6.2L (1993)
- Lying · south burgundy
Extra Details
Builder | LIVERPOOL BOATS |
---|---|
Lying | south burgundy |
Fuel capacity | 1,800.0 ltr (396.0 G) Total - 2 Tanks |
Water capacity | 1,800.0 ltr (396.0 G) Total - 1 Tanks |
Holding tank capacity | 600.0 ltr (132.0 G) Total - 1 Tanks |
Last survey | 26/04/2016 |
Mechanical
Engine | 1 x Diesel 140hp |
---|---|
Engine make and model | FORD BETA Marine 6 cyl. 6.2L (1993) |
Engine Hours |
engine1= 3014 |
Engine Cooled | Indirect |
Steering | Wheel |
Drive | Shaft |
Fuel consumption (approx) | 3.0 ltr (0.7 G) /hour At Cruising Speed |
Generator output | 5KVA |
140 Hp FORD 6 cyl. diesel engine installed in a real engine room. Full and easy access.
2 solar panels available but not fitted: 1x30W + 1 x18W
inverter 12/24 Mastervolt
7 batteries: 4 domestic (24V) + 2 engine start (24V) + 1 GE start (12V) (new in September 2022)
Dimensions
LOA | 17.80m |
---|---|
Beam | 4.02m |
Draft Max | 1.20m |
Airdraft | 2.95m |
Displacement | 21,000kg (46,305.0lbs) |
Headroom | 1.84m |
Storage | On marina |
Electrical Systems
24 volt battery, 240 volt generator, 240 shore power voltage, 7 batteries charged by: engine, shore power, generator KABOTA 2 cyl.
Construction
Construction | Steel |
---|---|
Underwater profile | Full-displacement |
Finish | 2 pack finish |
Built in 6/8/10
stainless tanks
holding tank new and never used (housed under wheelhouse floor)
Bow thruster tunnel fitted, but no bow thruster installed
Accommodation
Total # of berths | 4 |
---|---|
No. of double berths | 2 |
Cabin(s) | 1 |
Handbasin | 1 |
Shower | 1 |
Heads | 1 heads (Manual) |
HEATING:
Central heating through 4 radiators heated by the multi fuel stove in the saloon, coal chute from the roof for solid fuel storage. 1 portable petrol heater,
HOT WATER:
Hot water is produced by immersion heater (shore power) also by generator and is located in the engine room behind a wood panel.
ACCOMODATION:
Heads is connected to either fresh water or raw water but is currently disconnected for repair, a new photo will be provided once the new WC is installed.
Only one cabin in the forward of the boat, double berth of 140x190 and headroom of 1.84m.
Ensuite shower and washbasin, headroom is 1.84m.
Cabin floor space is 3mx1.90m
The heads is located in the salon (see mirror glass door) on the right of the stove, there is a wash basin too.
saloon with 2 confortable armchairs and one setee (converts into a berth of 110x190) and headroom of 1.82/1.84m.
Saloon floor space is 4.60mx2.80m
A corridor leads from the saloon to the galley past the glazed engine room midships. Access to the engine room is really easy via a door and an opening panel to give great access for working. The generator is located just opposite to the engine. Batteries have been changed in September 2022 and are all located under the steps of the engine room. Engine room headroom is 1.60m
The end of the corridor leads to the galley, 4 burner cooker, grill oven, a work surface and sink. A small fridge opposite in a corner. A hatch under the wheelhouse floor gives access to the hydraulic steering gear and the black water tank (not connected). The galley offers 2.80mx3.10m floor space and headroom of 1.76m
4 burner gas cooker/stove
Accommodation
Cooker/stove | |
---|---|
Grill | |
Oven | |
Sink | |
Refrigerator | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Raw water wash |
HEATING:
Central heating through 4 radiators heated by the multi fuel stove in the saloon, coal chute from the roof for solid fuel storage. 1 portable petrol heater,
HOT WATER:
Hot water is produced by immersion heater (shore power) also by generator and is located in the engine room behind a wood panel.
ACCOMODATION:
Heads is connected to either fresh water or raw water but is currently disconnected for repair, a new photo will be provided once the new WC is installed.
Only one cabin in the forward of the boat, double berth of 140x190 and headroom of 1.84m.
Ensuite shower and washbasin, headroom is 1.84m.
Cabin floor space is 3mx1.90m
The heads is located in the salon (see mirror glass door) on the right of the stove, there is a wash basin too.
saloon with 2 confortable armchairs and one setee (converts into a berth of 110x190) and headroom of 1.82/1.84m.
Saloon floor space is 4.60mx2.80m
A corridor leads from the saloon to the galley past the glazed engine room midships. Access to the engine room is really easy via a door and an opening panel to give great access for working. The generator is located just opposite to the engine. Batteries have been changed in September 2022 and are all located under the steps of the engine room. Engine room headroom is 1.60m
The end of the corridor leads to the galley, 4 burner cooker, grill oven, a work surface and sink. A small fridge opposite in a corner. A hatch under the wheelhouse floor gives access to the hydraulic steering gear and the black water tank (not connected). The galley offers 2.80mx3.10m floor space and headroom of 1.76m
4 burner gas cooker/stove
Deck Gear
Warps | |
---|---|
Fenders | |
Boathook |
Manual windlass
1 anchors
(CQR )
A simple hoist is fitted mid ship on the roof to ease the cranage of bikes for example.
Note that access to the interior is by both side deck and the wheelhouse at the stern. Note the passage along the gunwales is narrow with between 30 to 41 cm between superstructure and stanchions.
Nav Equipment
Compass | |
---|---|
VHF | |
Stereo | |
TV | |
Echo sounder |
Safety Equipment
Horn |
---|
2 bilge pumps (0 manual / 2 Electric)
Broker's Comments
Wide beam barge for sale in France. Boatshed Bourgogne is pleased to offer this LIVERPOOL BOATS one off widebeam barge at an attractive price.
A comfortable cruiser for the European inland waterways, she has already crossed the channel and cruised the French coasts with her previous owners who were full-time liveaboard boaters.
The engine sits in its own throne room with glass viewing panel. Good sized outside roof space ideal for building a wooden roof terrace. For health and age reasons the previous owner was not able to maintain the vessel as he would have liked and our vendor bought her recently to cruise and improve as he went along but a change of plan has brought the boat back to the market before completion of work.
This barge is now lying on a small town on the Saone River, in a sheltered port, is available at a great price to someone with the time and inclination to turn her back into a warm, comfortable cruising home.
For more information or organise a visit, please contact Magali, you local broker at Boatshed Bourgogne.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
august 2022
Why are you selling her?
change of plan
Where have you sailed her?
midicanals, Rhône, Saone